Item NO.:
|
IHDC 4-6kw Low frequency inverter |
Power : |
8000W / 10000W / 12000W
|
Certificate :
|
FCC CE ROHS
|
Lead Time : |
3-5 Work Day
|
Payment :
|
L/C T/T |
Warranty : | 1 Year |
MODEL | 8kw | 10KW | 12KW |
Continuous Output Power (W) | 8000W | 10000W | 12000W |
Rated input voltage | 48VDC | ||
Mains mode specifications: | |||
Input voltage waveform | Sine wave (mains or generator) | ||
Rated input voltage | 100V/110V/120V/220V/230V/240Vac | ||
Low voltage shutdown point | 92/184Vac±4% | ||
Low pressure recovery point | 97/194Vac ±4% | ||
High voltage shutdown point | 127/253Vac±4% | ||
High pressure recovery point | 121/243Vac±4% | ||
Maximum AC input voltage | 135/270V rms | ||
Rated input frequency | 50Hz/ 60Hz (automatic detection) | ||
Low voltage recovery point frequency | 40.5+0.3Hz ; | ||
Low voltage cut-off point frequency | 40+0.3Hz; | ||
High voltage recovery point frequency | 69.5+0.3Hz; | ||
High voltage cut-off point frequency | 70+0.3Hz ; | ||
Output voltage waveform | Consistent with the input voltage waveform | ||
Overload protection | Circuit breaker start | ||
Short circuit protection | Circuit breaker start | ||
Power Efficiency | >95% | ||
Conversion current | 30A | ||
Conversion time (Ac to Dc) | 10ms | ||
Bypass switching current | Yes | ||
Bypass maximum load current | 30A | ||
Output voltage waveform | Sine wave | ||
Power factor | 0~1.0 | ||
Rated output voltage (V) | 120/230Vac | ||
Rated output frequency (Hz) | 60/50Hz ± 0.3Hz | ||
Automatic tracking main frequency (Hz) | Yes (from the first connection) | ||
Output voltage range | ±2% rms | ||
efficient | >80% | ||
Overload protection (SMPS load) | (110%<load<125%) ±10%: disconnect the output voltage after 15 minutes | ||
(125%<load <150%) ±10%: disconnect the output voltage after 10 seconds | |||
Load >150% ±10%: Disconnect the output voltage after 20 seconds | |||
Peak capacity(10s) | 24000VA | 30000VA | 36000VA |
start the motor | 8HP | 10HP | 12HP |
Short circuit protection | Current limit (power off after 10s) | ||
Circuit breaker size | 63A | ||
Rated DC input voltage | 48VDC | ||
Power saving | load ≦2W | ||
Inverter dimensions(Length*width*height) | 698*415*200mm | ||
Packing size (length*width*height) | 850*520*310mm | ||
Inverter weight | 60+3 | 66+3 | 70+3 |
Packing operating weight | 62+3 | 68+3 | 72+3 |
Standard warranty | 2 year |